Cílem této práce je návrh integrovaného technického systému v kancelářské budově, se zaměřením na úspory energie a zajištění komfortu pro obyvatele.
Práce prezentuje studii o perspektivách rekonstrukci starých budov v Moldavsku, v souladu s moderními přístupy v oblasti energetické účinnosti a systémů řízení budov. Požadavky stavebních konstrukcí, spotřeby energie, tepelné pohody, osvětlení a akustiky jsou analyzovány z národní a evropské perspektivy.
Cíl je realizován pomocí návrhu systému HVAC, přípravy teplé vody a osvětlení pro konkrétní stavbu a zlepšení izolace obálky budovy. Možnost využití obnovitelných zdrojů energie je analyzována při použití solárního kolektoru pro přípravu teplé vody a fotovoltaického systému.
Principy činnosti Inteligentní budovy jsou realizovány prostřednictvím řídicího systému KNX a monitorovacího systému SCADA. Dopad navrhovaných opatření je ekonomicky hodnocený z hlediska existujících okolností.
Anotace v angličtině
Scope of this Thesis is designing an integrated technical system for an office building, with the focus on energy savings and provision of comfort for inhabitants.
Thesis presents a study on the perspectives of old buildings renovation in Moldova, according to modern approaches on energy efficiency and building management systems. Requirements towards building structures, energy consumption, thermal comfort, lighting and acoustics are ana-lyzed from national and EU perspective.
Aim is realized by designing HVAC, hot water preparation and lighting systems for a specific building and improvement of its building envelope insulation. Possibility of using renewable sources of energy is analyzed by design of solar collector for hot water preparation and photovoltaic system.
Intelligent building operation principles are implemented through KNX control and SCADA monitoring sys-tems. Finally, impact of proposed measures is economically evaluated in terms of existing circumstances.
Klíčová slova
Integrovaný systémy v budovách, energetická účinnost, inteligentní budovy, Moldavsko, stavební fyzika, systém HVAC, osvětlení, obnovitelné zdroje energie, KNX, SCADA.
Klíčová slova v angličtině
Integrated building system, energy efficiency, intelligent building, Moldova, building physics, HVAC system, lighting, renewable energy, KNX, SCADA.
Rozsah průvodní práce
193 p.
Jazyk
AN
Anotace
Cílem této práce je návrh integrovaného technického systému v kancelářské budově, se zaměřením na úspory energie a zajištění komfortu pro obyvatele.
Práce prezentuje studii o perspektivách rekonstrukci starých budov v Moldavsku, v souladu s moderními přístupy v oblasti energetické účinnosti a systémů řízení budov. Požadavky stavebních konstrukcí, spotřeby energie, tepelné pohody, osvětlení a akustiky jsou analyzovány z národní a evropské perspektivy.
Cíl je realizován pomocí návrhu systému HVAC, přípravy teplé vody a osvětlení pro konkrétní stavbu a zlepšení izolace obálky budovy. Možnost využití obnovitelných zdrojů energie je analyzována při použití solárního kolektoru pro přípravu teplé vody a fotovoltaického systému.
Principy činnosti Inteligentní budovy jsou realizovány prostřednictvím řídicího systému KNX a monitorovacího systému SCADA. Dopad navrhovaných opatření je ekonomicky hodnocený z hlediska existujících okolností.
Anotace v angličtině
Scope of this Thesis is designing an integrated technical system for an office building, with the focus on energy savings and provision of comfort for inhabitants.
Thesis presents a study on the perspectives of old buildings renovation in Moldova, according to modern approaches on energy efficiency and building management systems. Requirements towards building structures, energy consumption, thermal comfort, lighting and acoustics are ana-lyzed from national and EU perspective.
Aim is realized by designing HVAC, hot water preparation and lighting systems for a specific building and improvement of its building envelope insulation. Possibility of using renewable sources of energy is analyzed by design of solar collector for hot water preparation and photovoltaic system.
Intelligent building operation principles are implemented through KNX control and SCADA monitoring sys-tems. Finally, impact of proposed measures is economically evaluated in terms of existing circumstances.
Klíčová slova
Integrovaný systémy v budovách, energetická účinnost, inteligentní budovy, Moldavsko, stavební fyzika, systém HVAC, osvětlení, obnovitelné zdroje energie, KNX, SCADA.
Klíčová slova v angličtině
Integrated building system, energy efficiency, intelligent building, Moldova, building physics, HVAC system, lighting, renewable energy, KNX, SCADA.
Zásady pro vypracování
Study of energy efficient office buildings from the view of building physics, energy consumption, inner environment, lighting and accoustics, with the consideration of renewables usage.
Description of the requirements on building structures, building architecture, HVAC systems, lighting systems, including monitoring and control.
Design of suitable HVAC systems for a specific building.
Implementation of renewable technologies.
Design of an acceptable communication, control and monitoring system with SCADA visualization.
Zásady pro vypracování
Study of energy efficient office buildings from the view of building physics, energy consumption, inner environment, lighting and accoustics, with the consideration of renewables usage.
Description of the requirements on building structures, building architecture, HVAC systems, lighting systems, including monitoring and control.
Design of suitable HVAC systems for a specific building.
Implementation of renewable technologies.
Design of an acceptable communication, control and monitoring system with SCADA visualization.
Seznam doporučené literatury
AMERICAN SOCIETY OF HEATING, Refrigerating and Air-Conditioning Engineers. 2005 ASHRAE handbook fundamentals. I-P and SI eds. Atlanta, Ga: ASHRAE, 2005. ISBN 19-318-6273-7.
Taschenbuch für Heizung und Klimatechnik \matsymb{lbrack}13/14\matsymb{rbrack}: einschließlich Warmwasser- und Kältetechnik. München: Oldenbourg Industrieverlag, c2013, 1852 s. , 40 s. příl. ISBN 978-3-8356-3301-8.
MCDOWALL, Robert a Ross MONTGOMERY. Fundamentals of HVAC control systems. I-P ed. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, c2011, viii, 348 p. ISBN 978-193-3742-922.
KAVANAUGH, Stephen P a Ross MONTGOMERY. HVAC simplified. I-P ed. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, c2006, xi, 236 p. ISBN 978-193-1862-974.
SPITLER, Jeffrey D a Ross MONTGOMERY. Load calculation applications manual. Second edition. I-P edition. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, c2006, pages cm. ISBN 978-193-6504-756.
HAINES, Roger W a Michael E MYERS. HVAC systems design handbook. 5th ed. New York: McGraw-Hill, c2010, xvi, 560 p. ISBN 00-716-2297-7.
Seznam doporučené literatury
AMERICAN SOCIETY OF HEATING, Refrigerating and Air-Conditioning Engineers. 2005 ASHRAE handbook fundamentals. I-P and SI eds. Atlanta, Ga: ASHRAE, 2005. ISBN 19-318-6273-7.
Taschenbuch für Heizung und Klimatechnik \matsymb{lbrack}13/14\matsymb{rbrack}: einschließlich Warmwasser- und Kältetechnik. München: Oldenbourg Industrieverlag, c2013, 1852 s. , 40 s. příl. ISBN 978-3-8356-3301-8.
MCDOWALL, Robert a Ross MONTGOMERY. Fundamentals of HVAC control systems. I-P ed. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, c2011, viii, 348 p. ISBN 978-193-3742-922.
KAVANAUGH, Stephen P a Ross MONTGOMERY. HVAC simplified. I-P ed. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, c2006, xi, 236 p. ISBN 978-193-1862-974.
SPITLER, Jeffrey D a Ross MONTGOMERY. Load calculation applications manual. Second edition. I-P edition. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, c2006, pages cm. ISBN 978-193-6504-756.
HAINES, Roger W a Michael E MYERS. HVAC systems design handbook. 5th ed. New York: McGraw-Hill, c2010, xvi, 560 p. ISBN 00-716-2297-7.
Přílohy volně vložené
CD with 9 appendices
Přílohy vázané v práci
ilustrace, plány, schémata, tabulky
Převzato z knihovny
Ne
Plný text práce
Přílohy
Posudek(y) oponenta
Hodnocení vedoucího
Záznam průběhu obhajoby
The following questions were asked during the defense:
1) Was the SCADA visualization system made by yourself? Why did you use such a graphics for temperature measurements? (prof. Farana)
2) Did you compare the energy income vs. energy comsuption? (prof. Farana)
3) How much are the constants used in the work reliable? (doc. Kubalčík)
The student answered all the asked questions including those from the thesis supervisor and the reader excellently.